Wheel Loaders Archives - Pacific Coast Iron - Used Heavy Equipment Dealer https://www.pciequipmentsales.com/product-category/used-heavy-equipment/wheel-loaders/ Pacific Coast Iron - Used Heavy Equipment Dealer, Used Heavy Equipment for Sale, Heavy Equipment Dealer Wed, 28 Aug 2024 16:30:25 +0000 en hourly 1 https://wordpress.org/?v=6.6.2 https://www.pciequipmentsales.com/wp-content/uploads/2022/03/cropped-Logo_Redesign_V4_Circle_Black_Yellow-32x32.png Wheel Loaders Archives - Pacific Coast Iron - Used Heavy Equipment Dealer https://www.pciequipmentsales.com/product-category/used-heavy-equipment/wheel-loaders/ 32 32 2015 KOMATSU WA320-7 WHEEL LOADER https://www.pciequipmentsales.com/shop/2015-komatsu-wa320-7-wheel-loader-2/ Wed, 28 Aug 2024 16:29:39 +0000 https://www.pciequipmentsales.com/?post_type=product&p=10890 MACHINE FEATURES:
  • EROPS
  • HEAT/AC
  • TIER 4 INTERIM ENGINE
  • 3 YD BUCKET
  • RIDE CONTROL
  • AUTO SHIFT
  • JRB COUPLER

The post 2015 KOMATSU WA320-7 WHEEL LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2015 KOMATSU WA320-7 WHEEL LOADER

2015 KOMATSU WA320-7 WHEEL LOADER FOR SALE. UNIT HAS 6300HRS. EQUIPPED WITH A CAB HEAT/AC, JRB COUPLER, RIDE CONTROL, TIER 4 INTERIM KOMATSU ENGINE, AND RADIAL TIRES.

Specifications

Engine

Number Of Cylinders

6

Engine Make

2238

Engine Model

SAA6D107E-2

Net Power

165hp

Gross Power

173hp

Power Measured @

2100rpm

Aspiration

TURBOCHARGED

Operational

Fuel Capacity

64.7gal

Hydraulic System Fluid Capacity

23.7gal

Engine Oil Fluid Capacity

6.1gal

Cooling System Fluid Capacity

6.1gal

Front Axle/Diff Fluid Capacity

7.1gal

Rear Axle/Diff Fluid Capacity

6.7gal

Turning Radius

17.8ft in

Tire Size

20.5-25

Transmission

Transmission Type

HYDROSTATIC

Number Of Forward Gears

4

Number Of Reverse Gears

4

Max Speed – Forward

23.6mph

Max Speed – Reverse

23.6mph

Hydraulic System

Relief Valve Setting

2700psi

Pump Flow Capacity

29.1gal/min

Raise Time

5.7sec

Dump Time

1.6sec

Lower Time

3.3sec

Pump Type

GEAR TYPE PUMP

The post 2015 KOMATSU WA320-7 WHEEL LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2017 KOMATSU WA270-8 WHEEL LOADER https://www.pciequipmentsales.com/shop/2017-komatsu-wa270-8-wheel-loader/ Wed, 28 Aug 2024 16:14:03 +0000 https://www.pciequipmentsales.com/?post_type=product&p=10875 MACHINE FEATURES:
  • EROPS
  • HEAT/AC
  • TIER 4 FINAL ENGINE
  • 3 YD BUCKET
  • RIDE CONTROL
  • AUTO SHIFT
  • JRB COUPLER

The post 2017 KOMATSU WA270-8 WHEEL LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2017 KOMATSU WA270-8 WHEEL LOADER

2017 KOMATSU WA270-8 WHEEL LOADER FOR SALE.UNIT HAS ONLY 4300HRS. EQUIPPED WITH A CAB HEAT/AC, JRB COUPLER, RIDE CONTROL, TIER 4 FINAL KOMATSU ENGINE, AND RADIAL TIRES.

Specifications for WA270-8

Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 24° total oscillation
Reduction gear Spiral bevel gear
Differential gear Torque proportioning
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake Wet, multi-disc brake on transfer output shaft
Secondary brake Parking brake is commonly used
Engine
Model Komatsu SAA6D107E-3*
Type Water-cooled, 4-cycle
Aspiration Variable geometry turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.21 x 4.88 in
Piston displacement 408 in³
Governor All-speed, electronic
Horsepower:
Gross – SAE J1995 153 HP
Net – ISO 9249/SAE J1349 149 HP
Rated rpm 2,000 rpm
Max power – ISO 14396 @ 1,650 rpm 149 HP
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Final emissions certified
Hydraulic System
Steering system:
Hydraulic pump Piston pump, in common with loader control
Capacity (at rated rpm) 39.6 US gpm
Relief valve setting 3,000 psi
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders 2
Bore x stroke 2.76 x 17.8 in
Loader control:
Hydraulic pump Piston pump, in common with steering system
Capacity (at rated rpm) 39.6 US gpm
Relief valve setting 4,554 psi
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders: bore x stroke:
Lift cylinder / 2 4.3 x 28.2 in
Bucket cylinder / 1 5.5 x 18.9 in
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 6.0 s
Dump 2.0 s
Lower (empty) 3.2 s
Service Refill Capacities
Cooling system 8.8 US gal
Fuel tank 49.1 US gal
Engine 6.1 US gal
Hydraulic system 21.1 US gal
Axle front 4.9 US gal
Axle rear 4.8 US gal
Transfer case 1.8 US gal
DEF tank 3.7 US gal
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 38° each direction (40° to max end stop)
Minimum turning radius at
the center of outside tire		 17 ft. 0 in
Transmission

Transmission: Hydrostatic, 1 pump, 2 motors with speed range select

Travel Speed: Forward Reverse
1st 0.6 – 8.1 mph 0.6 – 8.1 mph
2nd 8.1 mph 8.1 mph
3rd 11.8 mph 11.8 mph
4th 23.6 mph 23.6 mph

Measured with 20.5-R25 tires

The post 2017 KOMATSU WA270-8 WHEEL LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2017 DEERE 524K WHEEL LOADER https://www.pciequipmentsales.com/shop/2017-deere-524k-wheel-loader/ Tue, 11 Jun 2024 17:28:05 +0000 https://www.pciequipmentsales.com/?post_type=product&p=10770 MACHINE FEATURES:
  • EROPS
  • HEAT/AC
  • TIER 4 INTERIM ENGINE
  • 3 YD BUCKET
  • RIDE CONTROL
  • AUTO SHIFT

The post 2017 DEERE 524K WHEEL LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2017 DEERE 524K WHEEL LOADER

2017 DEERE 524K WHEEL LOADER WITH 2600HRS. UNIT IS EQUIPPED WITH A TIER 4 INTERIM ENGINE, CAB HEAT/AC, RIDE CONTROL, REVERSING FAN, 3YD BUCKET, AND NEW RADIAL TIRES. JUST SERVICE BY DEERE.

MACHINE SPECIFICATIONS: 

 

Specification Value
Model John Deere 524K-II
Engine Manufacturer and Model John Deere PowerTech™ PVS 6068
Non-Road Emissions Standard EPA Final Tier 4/EU Stage IV
Cylinders 6
Valves Per Cylinder 4
Displacement 6.8 L (414 cu. in.)
Net Peak Power (ISO 9249) 104 kW (140 hp) at 1,900 rpm
Net Peak Torque (ISO 9249) 640 Nm (472 lb.-ft.) at 1,100 rpm
Net Torque Rise 66%
Fuel System High-pressure common rail
Lubrication Full-flow spin-on filter and internal cooler
Aspiration Turbocharged, charge air cooled
Air Cleaner Under-hood, dual-element dry type, restriction indicator in cab monitor for service
Cooling Hydraulically driven, proportionally controlled fan
Electrical System 24 volt with 100-amp alternator
Batteries (2) 12-volt, 950 CCA each
Transmission Type Countershaft-type PowerShift™
Torque Converter Single stage, single phase
Shift Control Electronically modulated, adaptive, load and speed dependent
Operator Interface Steering-column or joystick-mounted F-N-R and gear-select lever; Quick-Shift button on hydraulic lever
Shift Modes Manual/auto (1st–D or 2nd–D); Quick-Shift button with 2 selectable modes: kick-down or kick-up/down; adaptive clutch cutoff
Maximum Travel Speeds Forward: 38.5 km/h (23.9 mph), Reverse: 12.3 km/h (7.6 mph)
Final Drives Heavy-duty inboard-mounted planetary
Differentials Hydraulic locking front with conventional rear – standard; dual locking front and rear – optional
Rear Axle Oscillation 24 deg. (12 deg. each direction)
Service Brakes Hydraulically actuated, spring-retracted, self-adjusting inboard sun-shaft mounted, oil cooled, single disc
Parking Brakes Automatic spring applied, hydraulically released, driveline mounted, sealed wet multi disc
Tires/Wheels Michelin 20.5 R 25, 1 Star L-3
Refill Capacities Fuel Tank: 220 L (58 gal.), Cooling System: 23.5 L (24.8 qt.), Diesel Exhaust Fluid (DEF): 19 L (20 qt.), Engine Oil with Vertical Spin-On Filter: 19.5 L (20.6 qt.), Transmission Reservoir with Vertical Filter: 21.5 L (22.7 qt.), Axle Oil (front and rear, each): 18 L (19 qt.), Hydraulic Reservoir and Filter: 118.7 L (31.35 gal.), Park Brake Oil (wet disc): 0.3 L (10 oz.)
Hydraulic System Variable-displacement, axial-piston pump; closed-center, pressure-compensating system
Maximum Rated Flow 165 L/m (44 gpm)
System Relief Pressure 24 994 kPa (3,625 psi)
Loader Controls 2-function valve; joystick control or fingertip controls; hydraulic-function enable/disable; optional 3rd- and 4th-function valve with auxiliary lever
Steering Power, fully hydraulic, Articulation Angle: 80-deg. arc (40 deg. each direction)
Turning Radius 5.0 m (16 ft. 5 in.)
Operating Weight 12 668 kg (27,928 lb.)
Height to Top of Cab 3.25 m (10 ft. 8 in.)
Hood Height 2.375 m (7 ft. 9 in.)
Ground Clearance 0.40 m (15.7 in.)
Wheelbase 2.93 m (9 ft. 7 in.)
Overall Length, Bucket on Ground 7.34 m (24 ft. 1 in.)
Height to Hinge Pin, Fully Raised 3.77 m (12 ft. 5 in.)
Dump Clearance, 45 deg., Full Height 2.77 m (9 ft. 1 in.)
Reach, 45-deg. Dump, Full Height 0.98 m (3 ft. 2 in.)
Maximum Digging Depth 97 mm (3.8 in.)
Maximum Rollback at Ground Level 41 deg.
Maximum Rollback, Boom Fully Raised 55 deg.
Maximum Bucket Dump Angle, Fully Raised 51 deg.
Loader Clearance Circle, Bucket Carry Position 11.60 m (38 ft. 1 in.)
Bucket Capacity Heaped: 2.1 m³ (2.75 cu. yd.), Struck: 1.7 m³ (2.27 cu. yd.)
Breakout Force 9060 kg (19,974 lb.)
Tipping Load, 40-deg. Full Turn, No Tire Deflection 9168 kg (20,212 lb.)
Rated Operating Load, 50% Full-Turn Tipping Load 4584 kg (10,106 lb.)
Operating Weight 12 668 kg (27,928 lb.)

 

The post 2017 DEERE 524K WHEEL LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2015 KOMATSU WA320-7 WHEEL LOADER https://www.pciequipmentsales.com/shop/2015-komatsu-wa320-7-wheel-loader/ Tue, 11 Jun 2024 16:44:37 +0000 http://www.pciequipmentsales.com/?post_type=product&p=10709 MACHINE FEATURES:
  • EROPS
  • HEAT/AC
  • TIER 4 INTERIM ENGINE
  • QC
  • 3 YD BUCKET
  • RIDE CONTROL

The post 2015 KOMATSU WA320-7 WHEEL LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2015 KOMATSU WA320-7 WHEEL LOADER

2015 KOMATSU WA320-7 WHEEL LOADER WITH 5300HRS. UNIT IS EQUIPPED WITH A TIER 4 INTERIM ENGINE, CAB HEAT/AC, RIDE CONTROL, REVERSING FAN, AND A JRB COUPLER. JUST SERVICED AND READY TO GO TO WORK.

MACHINE SPECIFACATIONS:

| **Specification** | **Value** |
|—————————————-|——————————————————————————————————–|
| **Model** | Komatsu WA320-7 |
| **Engine** | Komatsu SAA6D107E-2 |
| **Engine Type** | Water-cooled, 4-cycle |
| **Aspiration** | Turbo-charged, after-cooled, cooled EGR |
| **Number of Cylinders** | 6 |
| **Bore** | 107 mm (4.21″) |
| **Stroke** | 124 mm (4.88″) |
| **Piston Displacement** | 6.69 ltr (408 in³) |
| **Governor** | All-speed, electronic |
| **Gross Horsepower (SAE J1995)** | 127 kW (170 HP) |
| **Net Horsepower (ISO 9249 / SAE J1349)** | 123 kW (165 HP) |
| **Rated RPM** | 2100 rpm |
| **Max Power (ISO 14396)** | 126 kW (169 HP) @ 1900 rpm |
| **Fan Drive Method for Radiator Cooling** | Hydraulic |
| **Fuel System** | Direct injection |
| **Lubrication System** | Gear pump, force-lubrication |
| **Air Cleaner** | Dry type with double elements and dust evacuator, plus dust indicator |
| **Operating Weight** | 33,731–33,984 lb (15,300–15,415 kg) |
| **Bucket Capacity** | 3.7–4.2 yd³ (2.8–3.2 m³) |
| **Hydraulic System Capacity** | 180 ltr/min (47.6 U.S. gal/min at rated rpm) |
| **Hydraulic Relief Valve Setting** | 20.6 MPa (210 kgf/cm², 3,000 psi) |
| **Lift Cylinder Dimensions** | 2 cylinders, 120 mm x 729 mm (4.7″ x 28.7″) |
| **Bucket Cylinder Dimensions** | 1 cylinder, 150 mm x 558 mm (5.9″ x 22″) |
| **Control Valve** | 2-spool type |
| **Hydraulic Cycle Time** | Raise: 6.1 sec, Dump: 1.9 sec, Lower (Empty): 3.5 sec |
| **Service Refill Capacities** | Cooling System: 28 ltr (7.4 U.S. gal), Fuel Tank: 245 ltr (64.7 U.S. gal), Engine: 23 ltr (6.1 U.S. gal), Hydraulic System: 90 ltr (23.7 U.S. gal), Axle Front: 27 ltr (7.1 U.S. gal), Axle Rear: 25.5 ltr (6.7 U.S. gal), Transfer Case: 5.8 ltr (1.5 U.S. gal) |
| **Travel Speed** | Forward/Reverse: 1st: 1.0 – 13.0 km/h (0.6 – 8.1 mph), 2nd: 13.0 km/h (8.1 mph), 3rd: 18.7 km/h (11.6 mph), 4th: 38.0 km/h (23.6 mph) |
| **Brake Type** | Hydraulically actuated, wet disc brakes actuate on four wheels |
| **Parking Brake** | Wet, multi-disc brake on transfer output shaft |
| **Axles** | Front: Fixed, semi-floating; Rear: Center-pin support, semi-floating, 24° total oscillation |
| **Steering System Type** | Articulated type, fully-hydraulic power steering |
| **Steering Angle** | 38.5° each direction (40° to max end stop) |
| **Minimum Turning Radius** | 5380 mm (17′ 8″) |

The post 2015 KOMATSU WA320-7 WHEEL LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2024 LIUGONG 838HV WHEEL LOADER https://www.pciequipmentsales.com/shop/new-2024-liugong-838hv-wheel-loader/ Wed, 06 Mar 2024 18:24:41 +0000 https://www.pciequipmentsales.com/?post_type=product&p=10601 MACHINE FEATURES:
  • EROPS
  • HEAT/AC
  • TIER 4 FINAL CUMMINS ENGINE
  • QC
  • 3 YD BUCKET
  • RIDE CONTROL
  • 3RD VALVE
  • AUTO GREASER

The post 2024 LIUGONG 838HV WHEEL LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2024 LIUGONG 838HV WHEEL LOADER

2024 LIUGONG 838HV WHEEL LOADER FOR SALE. UNIT IS EQUIPPED WITH A TIER 4 FINAL CUMMINS ENGINE, 3RD VALVE, HYDRAULIC QUICK COUPLER, RIDE CONTROL, REVERSING FAN, AND LIUGONG 3 YEAR/4000 HR FULL MACHINE WARRANTY. FORKS ALSO AVAILBILE.

MACHINE SPECIFACATIONS:

   ENGINE HYDRAULIC SYSTEM
Emissions rating EPA Tier 4 Final / EU Stage V Main pump type Piston
Make Cummins System pressure 3,771 psi (26 MPa)
Model B4.5 Raise 4.8 s
Gross power 154 hp (115 kW) @ 2,200 rpm
Dump time 1.5 s
Net power 142 hp (106 kW) @ 2,200 rpm
Float down time 3.1 s
Peak torque 525 lbf·ft (712 N·m) @ 1,200 rpm
Total cycle time 9.4 s
Cylinders 4
BUCKET PERFORMANCE
Displacement 1.18 gal (4.5 L)
Bucket capacity 2.35-5.2 yd3 (1.8-4.0 m3)
Aspiration Turbocharged &
Air-to-air intercooled
TIRES
   TRANSMISSION Tire size 20.5R25 L3
Transmission type Countershaft, power shift
OPERATING WEIGHT
Torque converter Single stage, three elements
Operating weight 29,033 lb (13,169 kg)
Max. travel speed, fwd 24.9 mph (40 km/h)
Max. travel speed, rev 17 mph (27.3 km/h) SERVICE CAPACITY
Fuel tank 57.3 gal (217 L)
Number of speeds, fwd 4
Number of speeds, rev 3 Engine oil 3 gal (11.6 L)
Cooling system 7.4 gal (28 L)
   AXLES
Hydraulic system 33 gal (125 L)
Differential front type Limited slip
Transmission 10.5 gal (40 L)
Differential rear type Limited slip
Axles, each 9 gal (34 L)
Axle oscillation ±12°
DEF tank 5 gal (19 L)
STEERING
Steering configuration Articulated
Steering pressure 2,611 psi (18 Mpa)
BRAKES
Service brake type Wet disc brake
Service brake actuation Fully hydraulic
Parking brake type Drum
Parking brake actuation Electro-hydraulic release
LOADER ARM PERFORMANCE WITH ATTACHMENT
Description
Tipping load – straight 19,610 lb (8,895 kg)
Tipping load – full turn 16,552 lb (7,508 kg)
Bucket breakout force 17,985 lbf (80 kN)
A   Maximum hinge pin height 12 ft 5 in (3,788 mm)
B   Dump clearence at full height discharge 9 ft 4 in (2,850 mm)
C   Dump reach at full height discharge 4 ft 1 in (1,250 mm)
D   Max. digging depth, bucket level 0.8 in (20 mm)
S1  Bucket rollback at ground level 42°
S2  Bucket rollback at carry 49°
S3  Bucket rollback at max. height 56°
S4  Max. dump angle at full height 45°
DIMENSIONS
Description
E    Ground clearance 1 ft 6 in (450 mm)
G   Wheelbase 9 ft 7 in (2,940 mm)
H   Cab height 11 ft 2 in (3,420 mm)
J    Wheel tread 6 ft 1 in (1,850 mm)
K   Width over tires 7 ft 10 in (2,370 mm)
L    Length with bucket down 24 ft 10 in (7,570 mm)
M   Turn angle, either side 40°
P   Rear angle of departure 31°
R4  Turning radius, bucket carry 19 ft 1 in (5,807 mm)
R2  Turning radius, outside of tire 17 ft 6 in (5,320 mm)
W  Width over bucket 8 ft 1 in (2,460 mm)

The post 2024 LIUGONG 838HV WHEEL LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2024 LIUGONG 856HV WHEEL LOADER https://www.pciequipmentsales.com/shop/new-2024-liugong-856h-wheel-loader/ Wed, 06 Mar 2024 17:57:16 +0000 https://www.pciequipmentsales.com/?post_type=product&p=10583 MACHINE FEATURES:
  • EROPS
  • HEAT/AC
  • TIER 4 FINAL CUMMINS ENGINE
  • QC
  • 4 YD BUCKET
  • RIDE CONTROL
  • 3RD VALVE
  • AUTO GREASER

The post 2024 LIUGONG 856HV WHEEL LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2024 LIUGONG 856HV WHEEL LOADER

NEW WHEEL LOADER FOR SALE 2024 LIUGONG 856HV 4 YARD CLASS WHEEL LOADER FOR SALE. UNIT IS EQUIPPED WITH A TIER 4 FINAL CUMMINS ENGINE, 3RD VALVE, HYDRAULIC QUICK COUPLER, RIDE CONTROL, REVERSING FAN, AND LIUGONG 3 YEAR/4000 HR FULL MACHINE WARRANTY. FORKS ALSO AVAILBILE.

 

ENGINE LOADER ARM PERFORMANCE WITH ATTACHMENT
Emissions regulation Tier 4 Final / Stage IV Tipping load – straight 28,219 lb (12,700 kg)
Make Cummins Tipping load – full turn 24,250 lb (11,000 kg)
Model QSB6.7 Bucket breakout force 40,275 lbf (179 kN)
Max gross power 225 hp (168 kW) @ 2,100 rpm Maximum hinge pin height 13 ft 2 in  (4,028 mm)
Max net power 215 hp (160 kW) @ 2,100 rpm Dump clearance at full height discharge 9 ft 8 in (2,948 mm)
Peak torque 1,106 lb-ft (1,500 N-m) @ 1,400 rpm Dump reach at full height discharge 3 ft 8 in (1,129 mm)
Displacement 409 in3  (6.7 L) Maximum digging depth, bucket level 3 in (85 mm)
Number of cylinders 6 Bucket rollback at ground level 43°
Aspiration Turbocharged & air-to-air intercooled Bucket rollback at carry 48°
Bucket rollback at maximum height 58°
TRANSMISSION STANDARD
Maximum dump angle at full height 45°
Transmission type Countershaft, power shift
BUCKET PERFORMANCE
Torque converter Single-stage, three-element
Maximum travel speed, fwd 23.7 mph (38.1 km/h) Bucket capacity 4.2 yd3  (3.2 m3)
Maximum travel speed, rev 14.9 mph (23.9 km/h) DIMENSIONS
Number of speeds, fwd 4
Ground clearance 17 in (431 mm)
Number of speeds, rev 3
Wheelbase 10 ft 10 in (3,320 mm)
AXLES Cab height 11 ft 3 in (3,450 mm)
Wheel tread 7 ft 0 in (2,150 mm)
Differential front type Limited slip
Width over tires 9 ft 0 in (2,750 mm)
Differential rear type Limited slip
Length with bucket down 27 ft 3 in (8,318 mm)
Axle oscillation ±12°
Turn angle, either side 38°
STEERING
Rear angle of departure 27°
Steering configuration Articulated
Turning radius, bucket carry 22 ft 9 in (6,954 mm)
Steering pressure 2,756 psi (19 MPa)
Turning radius, outside of tire 20 in 4 in (6,205 mm)
BRAKES
Width over bucket 9 ft 10 in (2,976 mm)
Service brake type Wet discs, two independent circuits TIRES
Service brake actuation Hydraulic
Tire size 23.5R25 L3 tire
Parking brake type Manual electronic control
OPERATING WEIGHTS
Parking brake actuation Hydraulic
Operating weight 42,540 lb (19,296 kg)
HYDRAULIC SYSTEM
SERVICE CAPACITY
Main pump type Piston
System pressure 3,191 psi (22 MPa) Fuel tank 79.2 (300 L)
Raise 5.7 s Engine oil 4.7 gal (18 L)
Dump time 1.3 s Cooling system 11.6 gal (44 L)
Float down time 3.0 s Hydraulic system 62.3 gal (236 L)
Total cycle time 10.0 s Transmission 11.8 gal (45 L)
Axles, each 11.6 gal (44 L)
DEF tank 5.0 gal (19 L)

The post 2024 LIUGONG 856HV WHEEL LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> NEW 2024 LIUGONG 848H WHEEL LOADER https://www.pciequipmentsales.com/shop/new-2024-liugong-848h-wheel-loader/ Wed, 06 Mar 2024 17:30:09 +0000 https://www.pciequipmentsales.com/?post_type=product&p=10566 MACHINE FEATURES:
  • EROPS
  • HEAT/AC
  • TIER 4 FINAL CUMMINS ENGINE
  • QC
  • 3.5 YD BUCKET
  • RIDE CONTROL
  • 3RD VALVE
  • AUTO GREASER

The post NEW 2024 LIUGONG 848H WHEEL LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> NEW 2024 LIUGONG 848H WHEEL LOADER

NEW WHEEL LOADER FOR SALE 2024 LIUGONG 848H 3.5 YARD CLASS WHEEL LOADER FOR SALE. UNIT IS EQUIPPED WITH A TIER 4 FINAL CUMMINS ENGINE, 3RD VALVE, HYDRAULIC QUICK COUPLER, RIDE CONTROL, REVERSING FAN, AND LIUGONG 3 YEAR/4000 HR FULL MACHINE WARRANTY. FORKS ALSO AVAILBILE.

848H SPECIFICATIONS >>>

ENGINE LOADER ARM PERFORMANCE WITH ATTACHMENT
Emissions regulation Tier 4 Final / Stage IV Tipping load – straight 23,876 lb (10,830 kg)
Make Cummins Tipping load – full turn 21,418 lb (9,715 kg)
Model QSB6.7 Bucket breakout force 26,977 lbf (120.0 kN)
Max gross power 175 hp (129 kW) @ 2,100 rpm Maximum hinge pin height 12 ft 11 in (3,935 mm)
Max net power 167 hp (123 kW) @ 2,100 rpm Dump clearance at full height discharge  9 ft 0 in (2,750 mm)
Peak torque 620 lb-ft (841 N-m) @ 1,400 rpm Dump reach at full height discharge 3 ft 5 in (1,050 mm)
Displacement 409 in3  (6.7 L) Maximum digging depth, bucket level 3 in (70 mm)
Number of cylinders 6 Bucket rollback at ground level 45O
Aspiration Turbocharged & air-to-air intercooled Bucket rollback at carry 48O
TRANSMISSION STANDARD Bucket rollback at maximum height 60O
Maximum dump angle at full height 45O
Transmission type Countershaft, power shift
Torque converter Single-stage, three-element BUCKET PERFORMANCE
Maximum travel speed, fwd 27.5 mph (44.3 km/h) Bucket capacity 3.5 yd3  (2.7 m3)
Maximum travel speed, rev 15.7 mph (25.3 km/h) DIMENSIONS
Number of speeds, fwd. 4 Ground clearance 1 ft 3 in (366 mm)
Number of speeds, rev 3 Wheelbase 10 ft 0 in (3,050 mm)
AXLES Cab height 10 ft 10 in (3,310 mm)
Differential front type Limited slip Wheel tread 6 ft 9 in (2,050 mm)
Differential rear type Limited slip Width over tires 8 ft 4 in (2,548 mm)
Axle oscillation ±12° Length with bucket down 26 ft 4 in (8,030 mm)
Turn angle, either side 38O
STEERING Rear angle of departure 28O
Steering configuration Articulated Turning radius, bucket carry 20 ft 6 in (6,520 mm)
Steering pressure 2,611 psi (18 MPa) Turning radius, outside of tire 18 ft 4 in (5,590 mm)
BRAKES Width over bucket 9 ft 1 in (2,750 mm)
Service brake type Wet discs, two independent circuits TIRES
Service brake actuation Hydraulic Tire Size 20.5R25 L3 tire
Parking brake type Manual electronic control OPERATING WEIGHTS
Parking brake actuation Hydraulic
HYDRAULIC SYSTEM Operating weight 35,260 lb (15,994 kg)
Main pump type Piston SERVICE CAPACITY
Pressure 3,002 psi (20.7 MPa) Fuel tank 65.0 gal (245 L)
Raise 5.5 s Engine oil 4.5 gal  (17 L)
Dump time 1.6 s Cooling system 12.0 gal (44 L)
Float down time 3.0 s Hydraulic system 48.0 gal (180 L)
Total cycle time 10.1 s Transmission 10.5 gal (40 L)
Axles, each 9.5 gal (36 L)
DEF tank 5.0 gal (19 L)

The post NEW 2024 LIUGONG 848H WHEEL LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2019 LIUGONG 848H WHEEL LOADER https://www.pciequipmentsales.com/shop/2019-liugong-848h-wheel-loader-2800hrs-3rd-valve-coupler-ride-control/ Wed, 06 Mar 2024 17:08:56 +0000 https://www.pciequipmentsales.com/?post_type=product&p=10546 UNIT HAS BEEN PROFESSIONALLY MAINTAINED SINCE NEW AND IS READY TO GO TO WORK.

MACHINE FEATURES:

  • EROPS
  • HEAT/AC
  • TIER 4 FINAL CUMMINS ENGINE
  • QC
  • 3.5 YD BUCKET
  • RIDE CONTROL
  • 3RD VALVE

The post 2019 LIUGONG 848H WHEEL LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2019 LIUGONG 848H WHEEL LOADER

VERY NICE LOW HOUR LIUGONG 948H 3.5YD CLASS WHEEL LOADER. ONE OWNER MACHINE! UNIT IS EQUIPPED WITH A HYDRAULIC COUPLER, GP BUCKET, 3RD VALVE, RIDE CONTROL, AND RADIAL TIRES.

848H SPECIFICATIONS >>>

ENGINE LOADER ARM PERFORMANCE WITH ATTACHMENT
Emissions regulation Tier 4 Final / Stage IV Tipping load – straight 23,876 lb (10,830 kg)
Make Cummins Tipping load – full turn 21,418 lb (9,715 kg)
Model QSB6.7 Bucket breakout force 26,977 lbf (120.0 kN)
Max gross power 175 hp (129 kW) @ 2,100 rpm Maximum hinge pin height 12 ft 11 in (3,935 mm)
Max net power 167 hp (123 kW) @ 2,100 rpm Dump clearance at full height discharge  9 ft 0 in (2,750 mm)
Peak torque 620 lb-ft (841 N-m) @ 1,400 rpm Dump reach at full height discharge 3 ft 5 in (1,050 mm)
Displacement 409 in3  (6.7 L) Maximum digging depth, bucket level 3 in (70 mm)
Number of cylinders 6 Bucket rollback at ground level 45O
Aspiration Turbocharged & air-to-air intercooled Bucket rollback at carry 48O
TRANSMISSION STANDARD Bucket rollback at maximum height 60O
Maximum dump angle at full height 45O
Transmission type Countershaft, power shift
Torque converter Single-stage, three-element BUCKET PERFORMANCE
Maximum travel speed, fwd 27.5 mph (44.3 km/h) Bucket capacity 3.5 yd3  (2.7 m3)
Maximum travel speed, rev 15.7 mph (25.3 km/h) DIMENSIONS
Number of speeds, fwd. 4 Ground clearance 1 ft 3 in (366 mm)
Number of speeds, rev 3 Wheelbase 10 ft 0 in (3,050 mm)
AXLES Cab height 10 ft 10 in (3,310 mm)
Differential front type Limited slip Wheel tread 6 ft 9 in (2,050 mm)
Differential rear type Limited slip Width over tires 8 ft 4 in (2,548 mm)
Axle oscillation ±12° Length with bucket down 26 ft 4 in (8,030 mm)
Turn angle, either side 38O
STEERING Rear angle of departure 28O
Steering configuration Articulated Turning radius, bucket carry 20 ft 6 in (6,520 mm)
Steering pressure 2,611 psi (18 MPa) Turning radius, outside of tire 18 ft 4 in (5,590 mm)
BRAKES Width over bucket 9 ft 1 in (2,750 mm)
Service brake type Wet discs, two independent circuits TIRES
Service brake actuation Hydraulic Tire Size 20.5R25 L3 tire
Parking brake type Manual electronic control OPERATING WEIGHTS
Parking brake actuation Hydraulic
HYDRAULIC SYSTEM Operating weight 35,260 lb (15,994 kg)
Main pump type Piston SERVICE CAPACITY
Pressure 3,002 psi (20.7 MPa) Fuel tank 65.0 gal (245 L)
Raise 5.5 s Engine oil 4.5 gal  (17 L)
Dump time 1.6 s Cooling system 12.0 gal (44 L)
Float down time 3.0 s Hydraulic system 48.0 gal (180 L)
Total cycle time 10.1 s Transmission 10.5 gal (40 L)
Axles, each 9.5 gal (36 L)
DEF tank 5.0 gal (19 L)

The post 2019 LIUGONG 848H WHEEL LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2014 KOMATSU WA320-7 WHEEL LOADER-SOLD https://www.pciequipmentsales.com/shop/2014-komatsu-wa320-7-wheel-loader/ Thu, 20 May 2021 23:31:43 +0000 https://www.pciequipmentsales.com/?post_type=product&p=10215 2014 KOMATSU WA320-7 WHEEL LOADER

UNIT HAS BEEN PROFESSIONALLY MAINTAINED SINCE NEW AND IS READY TO GO TO WORK.

FEATURES:

  • EROPS
  • HEAT/AC
  • TIER 4 ENGINE
  • QC
  • 3.5 YD BUCKET
  • RIDE CONTROL

The post 2014 KOMATSU WA320-7 WHEEL LOADER-SOLD appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2014 KOMATSU WA320-7 WHEEL LOADER

2014 KOMATSU WA320-7 WHEEL LOADER WITH 3900HRS. UNIT IS EQUIPPED WITH A TIER 4 ENGINE, CAB HEAT/AC, JRB HYDRAULIC UC, RIDE CONTROL, 4 WAY JOYSTICK, AUTO SHIFT, AND A REVERSING FAN. REAR ENGINE COVER WILL BE FIXED PRIOR TO SALE. FLEET MAINTAINED SINCE NEW.

Specifications

Engine

Number Of Cylinders

6

Engine Make

2238

Engine Model

SAA6D107E-2

Net Power

165hp

Gross Power

173hp

Power Measured @

2100rpm

Aspiration

TURBOCHARGED

Operational

Fuel Capacity

64.7gal

Hydraulic System Fluid Capacity

23.7gal

Engine Oil Fluid Capacity

6.1gal

Cooling System Fluid Capacity

6.1gal

Front Axle/Diff Fluid Capacity

7.1gal

Rear Axle/Diff Fluid Capacity

6.7gal

Turning Radius

17.8ft in

Tire Size

20.5-25

Transmission

Transmission Type

HYDROSTATIC

Number Of Forward Gears

4

Number Of Reverse Gears

4

Max Speed – Forward

23.6mph

Max Speed – Reverse

23.6mph

Hydraulic System

Relief Valve Setting

2700psi

Pump Flow Capacity

29.1gal/min

Raise Time

5.7sec

Dump Time

1.6sec

Lower Time

3.3sec

Pump Type

GEAR TYPE PUMP

 

The post 2014 KOMATSU WA320-7 WHEEL LOADER-SOLD appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2019 KOMATSU WA380-8 WHEEL LOADER-SOLD https://www.pciequipmentsales.com/shop/2019-komatsu-wa380-8-wheel-loader/ Wed, 26 Feb 2020 00:19:53 +0000 https://www.pciequipmentsales.com/?post_type=product&p=9612 2019 KOMATSU WA380-8 WHEEL LOADER

UNIT HAS BEEN PROFESSIONALLY MAINTAINED SINCE NEW AND IS READY TO GO TO WORK.

FEATURES:

  • EROPS
  • HEAT/AC
  • TIER 4 ENGINE
  • QC
  • 4 YD BUCKET
  • RIDE CONTROL

The post 2019 KOMATSU WA380-8 WHEEL LOADER-SOLD appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2013 KOMATSU WA380-7 WHEEL LOADER

ALMOST NEW 2019 KOMATSU WA380-8 WITH 60HRS. UNIT WAS PURCHASED BRAND NEW FROM ROAD MACHINERY IN 2019. LOADED WITH RIDE CONTROL, Q,C, 3RD VALVE, AUTO SHIFT, MICHELLIN RADIAL TIRES, REAR CAMERA AND A TIER 4 FINAL ENGINE. STILL HAS 3 YEARS OF KOMATSU WARRANTY REMAINING.

Specifications

Engine

Emissions Certification

EPA Tier 4

Diesel Fuel Tank Capacity – Standard Tank

9.6gal

Number Of Cylinders

6

Engine Model

SAA6D107E-3

Net Power

191hp

Air Cleaner

Dry type with double elements

Gross Power

192hp

Displacement

408.3cu in

Torque Measured @

2100rpm

Aspiration

Turbocharged

Bore

4.3in

Stroke

4.9in

Operational

Operating Weight

40686.4lb

Fuel Capacity

79.3gal

Hydraulic System Fluid Capacity

37.6gal

Engine Oil Fluid Capacity

6.1gal

Cooling System Fluid Capacity

16.1gal

Transmission Fluid Capacity

14.3gal

Front Axle/Diff Fluid Capacity

10.6gal

Rear Axle/Diff Fluid Capacity

10.6gal

Static Tipping Weight

34039.4lb

Operating Voltage

24V

Alternator Supplied Amperage

90amps

Transmission

Transmission Type

Automatic

Number Of Forward Gears

4

Number Of Reverse Gears

4

Max Speed – Forward

23.3mph

Max Speed – Reverse

24mph

Hydraulic System

Pump Flow Capacity

36.2gal/min

Raise Time

5.9sec

Dump Time

1.8sec

Lower Time

3.3sec

Pump Type

Piston pump

Relief Valve Pressure

4550psi

The post 2019 KOMATSU WA380-8 WHEEL LOADER-SOLD appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]>