Skip Loaders Archives - Pacific Coast Iron - Used Heavy Equipment Dealer

2013 DEERE 210K SKIP LOADER

admin — Wed, 29 Aug 2018 18:39:57 +0000

2013 DEERE 210K SKIP LOADER

2013 DEERE 210K SKIP LOADER WITH 2938HRS. UNIT IS EQUIPPED WITH MP BUCKET, REAR WEIGHTS, DUAL TILT, TIER 4 INTERIM ENGINE, AND 4X4. REAR TIRES ARE 75%. FRONTS ARE 70%. JUST SERVICED AND READY TO GO TO WORK.

SPECIFICATIONS:

Manufacturer	John Deere
Model	210K Interim Tier 4
DRIVELINE
Engine manufacturer	John Deere
Engine model	PowerTech E 4045HT073
Emission rating	Interim Tier 4
Displacement, ltr (Inches³)	4.5 (276)
Rated speed, rpm	2000
Net output, kW (hp)	66 (88)
Transmission type	Power Shift
Number of speeds – forward	4
Number of speeds – reverse	2
Front axle type	Mechanical FWD
Service type	Wet Multi Disc
Service actuation	Hydraulic w/Power Assist
DIMENSIONS
Overall length, mm (ft/in)	5230 (17 ft 2 in)
Minimum transport height, mm (ft/in)	2540 (8 ft 4 in)
Overall width, mm (ft/in)	2130 (7 ft )
Std shovel width, mm (inches)	2184 (86)
Dump Clearance @ 45 deg, mm (ft/in)	2670 (8 ft 9 in)
Dump Reach, mm (inches)	914 (36)
Bucket Hinge Pin – Max Height, mm (ft/in)	3340 (10 ft 11 in)
Coupler	Standard
CAPACITIES
Fuel tank capacity, ltr (gallons (US))	102.2 (27)
Hydraulic tank capacity, ltr (gallons (US))	37 (9.8)
Shovel cap SAE heaped, m³ (yd³)	0.77 (1)
Alternator capacity, Amp	120
PERFORMANCE
Max. Forward Speed, kph (mph)	31.2 (19.4)
Max. Reverse Speed, kph (mph)	12.9 (8)
Lift Capacity to Full Height, kg (lbs)	2548 (5612)
Oscillation angle, ± °	22
Power Take Off	Optional
PTO rated speed, rpm	540
Breakout force std shovel, kN (lbf)	44.3 (9953)
System voltage, V	12
Pump type	Gear
Pump flow, lt/min (gallons (US) / min)	96 (25.3)
System pressure, bar (PSI)	189.61 (2750)
WEIGHTS
Operating weight, kg (lbs)	4959 (10936)

Specifications are based on published information at the time of publication. Specifications are subject to change without notice.

Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States.In all cases, current published price lists and incentive program bulletins will take precedence. All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted.

The post 2013 DEERE 210K SKIP LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

2013 DEERE 210K SKIP LOADER

admin — Wed, 29 Aug 2018 18:32:28 +0000

2013 DEERE 210K SKIP LOADER

2013 DEERE 210K SKIP LOADER WITH 2356HRS. UNIT IS EQUIPPED WITH MP BUCKET, REAR WEIGHTS, DUAL TILT, TIER 4 INTERIM ENGINE, AND 4X4. REAR TIRES ARE 75%. FRONTS ARE 70%. JUST SERVICED AND READY TO GO TO WORK.

SPECIFICATIONS:

Manufacturer	John Deere
Model	210K Interim Tier 4
DRIVELINE
Engine manufacturer	John Deere
Engine model	PowerTech E 4045HT073
Emission rating	Interim Tier 4
Displacement, ltr (Inches³)	4.5 (276)
Rated speed, rpm	2000
Net output, kW (hp)	66 (88)
Transmission type	Power Shift
Number of speeds – forward	4
Number of speeds – reverse	2
Front axle type	Mechanical FWD
Service type	Wet Multi Disc
Service actuation	Hydraulic w/Power Assist
DIMENSIONS
Overall length, mm (ft/in)	5230 (17 ft 2 in)
Minimum transport height, mm (ft/in)	2540 (8 ft 4 in)
Overall width, mm (ft/in)	2130 (7 ft )
Std shovel width, mm (inches)	2184 (86)
Dump Clearance @ 45 deg, mm (ft/in)	2670 (8 ft 9 in)
Dump Reach, mm (inches)	914 (36)
Bucket Hinge Pin – Max Height, mm (ft/in)	3340 (10 ft 11 in)
Coupler	Standard
CAPACITIES
Fuel tank capacity, ltr (gallons (US))	102.2 (27)
Hydraulic tank capacity, ltr (gallons (US))	37 (9.8)
Shovel cap SAE heaped, m³ (yd³)	0.77 (1)
Alternator capacity, Amp	120
PERFORMANCE
Max. Forward Speed, kph (mph)	31.2 (19.4)
Max. Reverse Speed, kph (mph)	12.9 (8)
Lift Capacity to Full Height, kg (lbs)	2548 (5612)
Oscillation angle, ± °	22
Power Take Off	Optional
PTO rated speed, rpm	540
Breakout force std shovel, kN (lbf)	44.3 (9953)
System voltage, V	12
Pump type	Gear
Pump flow, lt/min (gallons (US) / min)	96 (25.3)
System pressure, bar (PSI)	189.61 (2750)
WEIGHTS
Operating weight, kg (lbs)	4959 (10936)

Specifications are based on published information at the time of publication. Specifications are subject to change without notice.

Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States.In all cases, current published price lists and incentive program bulletins will take precedence. All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted.

The post 2013 DEERE 210K SKIP LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

2012 DEERE 210K SKIP LOADER

admin — Wed, 13 Dec 2017 22:19:19 +0000

2012 DEERE 210K SKIP LOADER FOR SALE

2012 DEERE 210k SKIP LOADER WITH ONLY 1900HRS! THIS UNIT HAS A GP BUCKET, GANNON SCRAPER BOX WITH 3 POINT HITCH AND RIPPERS, 4X4, TIRES AVERAGE 50%. UNIT IS EQUIPPED WITH A TIER 4 INTERIM DEERE ENGINE. READY TO GO TO WORK.

SPECIFICATIONS:

Manufacturer	John Deere
Model	210K Interim Tier 4
DRIVELINE
Engine manufacturer	John Deere
Engine model	PowerTech E 4045HT073
Emission rating	Interim Tier 4
Displacement, ltr (Inches³)	4.5 (276)
Rated speed, rpm	2000
Net output, kW (hp)	66 (88)
Transmission type	Power Shift
Number of speeds – forward	4
Number of speeds – reverse	2
Front axle type	Mechanical FWD
Service type	Wet Multi Disc
Service actuation	Hydraulic w/Power Assist
DIMENSIONS
Overall length, mm (ft/in)	5230 (17 ft 2 in)
Minimum transport height, mm (ft/in)	2540 (8 ft 4 in)
Overall width, mm (ft/in)	2130 (7 ft )
Std shovel width, mm (inches)	2184 (86)
Dump Clearance @ 45 deg, mm (ft/in)	2670 (8 ft 9 in)
Dump Reach, mm (inches)	914 (36)
Bucket Hinge Pin – Max Height, mm (ft/in)	3340 (10 ft 11 in)
Coupler	Standard
CAPACITIES
Fuel tank capacity, ltr (gallons (US))	102.2 (27)
Hydraulic tank capacity, ltr (gallons (US))	37 (9.8)
Shovel cap SAE heaped, m³ (yd³)	0.77 (1)
Alternator capacity, Amp	120
PERFORMANCE
Max. Forward Speed, kph (mph)	31.2 (19.4)
Max. Reverse Speed, kph (mph)	12.9 (8)
Lift Capacity to Full Height, kg (lbs)	2548 (5612)
Oscillation angle, ± °	22
Power Take Off	Optional
PTO rated speed, rpm	540
Breakout force std shovel, kN (lbf)	44.3 (9953)
System voltage, V	12
Pump type	Gear
Pump flow, lt/min (gallons (US) / min)	96 (25.3)
System pressure, bar (PSI)	189.61 (2750)
WEIGHTS
Operating weight, kg (lbs)	4959 (10936)

Specifications are based on published information at the time of publication.Specifications are subject to change without notice.

Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States.In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted.

The post 2012 DEERE 210K SKIP LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

2013 DEERE 210K SKIP LOADER

admin — Mon, 27 Nov 2017 21:55:01 +0000

2013 DEERE 210K SKIP LOADER

2013 DEERE 210k SKIP LOADER WITH ONLY 2100HRS! THIS UNIT HAS A MP BUCKET, SUSPENSION SEAT, DUAL TILT, GANNON SCRAPER BOX WITH 3 POINT HITCH AND RIPPERS, 4X4, AND A TIER 4 INTERIM DEERE ENGINE. BRAND NEW TIRES JUST INSTALLED.

SPECIFICATIONS:

Manufacturer	John Deere
Model	210K Interim Tier 4
DRIVELINE
Engine manufacturer	John Deere
Engine model	PowerTech E 4045HT073
Emission rating	Interim Tier 4
Displacement, ltr (Inches³)	4.5 (276)
Rated speed, rpm	2000
Net output, kW (hp)	66 (88)
Transmission type	Power Shift
Number of speeds – forward	4
Number of speeds – reverse	2
Front axle type	Mechanical FWD
Service type	Wet Multi Disc
Service actuation	Hydraulic w/Power Assist
DIMENSIONS
Overall length, mm (ft/in)	5230 (17 ft 2 in)
Minimum transport height, mm (ft/in)	2540 (8 ft 4 in)
Overall width, mm (ft/in)	2130 (7 ft )
Std shovel width, mm (inches)	2184 (86)
Dump Clearance @ 45 deg, mm (ft/in)	2670 (8 ft 9 in)
Dump Reach, mm (inches)	914 (36)
Bucket Hinge Pin – Max Height, mm (ft/in)	3340 (10 ft 11 in)
Coupler	Standard
CAPACITIES
Fuel tank capacity, ltr (gallons (US))	102.2 (27)
Hydraulic tank capacity, ltr (gallons (US))	37 (9.8)
Shovel cap SAE heaped, m³ (yd³)	0.77 (1)
Alternator capacity, Amp	120
PERFORMANCE
Max. Forward Speed, kph (mph)	31.2 (19.4)
Max. Reverse Speed, kph (mph)	12.9 (8)
Lift Capacity to Full Height, kg (lbs)	2548 (5612)
Oscillation angle, ± °	22
Power Take Off	Optional
PTO rated speed, rpm	540
Breakout force std shovel, kN (lbf)	44.3 (9953)
System voltage, V	12
Pump type	Gear
Pump flow, lt/min (gallons (US) / min)	96 (25.3)
System pressure, bar (PSI)	189.61 (2750)
WEIGHTS
Operating weight, kg (lbs)	4959 (10936)

Specifications are based on published information at the time of publication.Specifications are subject to change without notice.

Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States.In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted.

The post 2013 DEERE 210K SKIP LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

2013 DEERE 210K SKIP LOADER

admin — Wed, 23 Aug 2017 22:26:49 +0000

2013 DEERE 210K SKIP LOADER

2012 DEERE 210k SKIP LOADER WITH ONLY 2400HRS! THIS UNIT HAS A MP BUCKET, SUSPENSION SEAT, DUAL TILT, GANNON SCRAPER BOX WITH 3 POINT HITCH AND RIPPERS, 4X4, AND A TIER 4 INTERIM DEERE ENGINE FRONT TIRES ARE NEW, REAR TIRES 50%.

SPECIFICATIONS:

Manufacturer	John Deere
Model	210K Interim Tier 4
DRIVELINE
Engine manufacturer	John Deere
Engine model	PowerTech E 4045HT073
Emission rating	Interim Tier 4
Displacement, ltr (Inches³)	4.5 (276)
Rated speed, rpm	2000
Net output, kW (hp)	66 (88)
Transmission type	Power Shift
Number of speeds – forward	4
Number of speeds – reverse	2
Front axle type	Mechanical FWD
Service type	Wet Multi Disc
Service actuation	Hydraulic w/Power Assist
DIMENSIONS
Overall length, mm (ft/in)	5230 (17 ft 2 in)
Minimum transport height, mm (ft/in)	2540 (8 ft 4 in)
Overall width, mm (ft/in)	2130 (7 ft )
Std shovel width, mm (inches)	2184 (86)
Dump Clearance @ 45 deg, mm (ft/in)	2670 (8 ft 9 in)
Dump Reach, mm (inches)	914 (36)
Bucket Hinge Pin – Max Height, mm (ft/in)	3340 (10 ft 11 in)
Coupler	Standard
CAPACITIES
Fuel tank capacity, ltr (gallons (US))	102.2 (27)
Hydraulic tank capacity, ltr (gallons (US))	37 (9.8)
Shovel cap SAE heaped, m³ (yd³)	0.77 (1)
Alternator capacity, Amp	120
PERFORMANCE
Max. Forward Speed, kph (mph)	31.2 (19.4)
Max. Reverse Speed, kph (mph)	12.9 (8)
Lift Capacity to Full Height, kg (lbs)	2548 (5612)
Oscillation angle, ± °	22
Power Take Off	Optional
PTO rated speed, rpm	540
Breakout force std shovel, kN (lbf)	44.3 (9953)
System voltage, V	12
Pump type	Gear
Pump flow, lt/min (gallons (US) / min)	96 (25.3)
System pressure, bar (PSI)	189.61 (2750)
WEIGHTS
Operating weight, kg (lbs)	4959 (10936)

Specifications are based on published information at the time of publication.Specifications are subject to change without notice.

Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States.In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted.

The post 2013 DEERE 210K SKIP LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

2013 DEERE 210K SKIP LOADER-(SOLD)

admin — Wed, 16 Aug 2017 00:06:47 +0000

2013 DEERE 210K SKIP LOADER

2012 DEERE 210k SKIP LOADER WITH ONLY 2300HRS! THIS UNIT HAS A MP BUCKET, SUSPENSION SEAT, DUAL TILT, GANNON SCRAPER BOX WITH 3 POINT HITCH AND RIPPERS, 4X4, AND A TIER 4 INTERIM DEERE ENGINE FRONT TIRES ARE NEW, REAR TIRES 50%.

SPECIFACATIONS:

Manufacturer	John Deere
Model	210K Interim Tier 4
DRIVELINE
Engine manufacturer	John Deere
Engine model	PowerTech E 4045HT073
Emission rating	Interim Tier 4
Displacement, ltr (Inches³)	4.5 (276)
Rated speed, rpm	2000
Net output, kW (hp)	66 (88)
Transmission type	Power Shift
Number of speeds – forward	4
Number of speeds – reverse	2
Front axle type	Mechanical FWD
Service type	Wet Multi Disc
Service actuation	Hydraulic w/Power Assist
DIMENSIONS
Overall length, mm (ft/in)	5230 (17 ft 2 in)
Minimum transport height, mm (ft/in)	2540 (8 ft 4 in)
Overall width, mm (ft/in)	2130 (7 ft )
Std shovel width, mm (inches)	2184 (86)
Dump Clearance @ 45 deg, mm (ft/in)	2670 (8 ft 9 in)
Dump Reach, mm (inches)	914 (36)
Bucket Hinge Pin – Max Height, mm (ft/in)	3340 (10 ft 11 in)
Coupler	Standard
CAPACITIES
Fuel tank capacity, ltr (gallons (US))	102.2 (27)
Hydraulic tank capacity, ltr (gallons (US))	37 (9.8)
Shovel cap SAE heaped, m³ (yd³)	0.77 (1)
Alternator capacity, Amp	120
PERFORMANCE
Max. Forward Speed, kph (mph)	31.2 (19.4)
Max. Reverse Speed, kph (mph)	12.9 (8)
Lift Capacity to Full Height, kg (lbs)	2548 (5612)
Oscillation angle, ± °	22
Power Take Off	Optional
PTO rated speed, rpm	540
Breakout force std shovel, kN (lbf)	44.3 (9953)
System voltage, V	12
Pump type	Gear
Pump flow, lt/min (gallons (US) / min)	96 (25.3)
System pressure, bar (PSI)	189.61 (2750)
WEIGHTS
Operating weight, kg (lbs)	4959 (10936)

Specifications are based on published information at the time of publication.Specifications are subject to change without notice.

Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States.In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted.

The post 2013 DEERE 210K SKIP LOADER-(SOLD) appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

2012 CASE 570M XT SKIP LOADER-(SOLD)

admin — Fri, 11 Aug 2017 17:33:26 +0000

2012 CASE 570M XT SKIP LOADER- $38,900

2012 CASE 570MXT SKIP LOADER WITH ONLY 2500HRS!! THIS UNIT IS EQUIPPED WITH AN MP BUCKET, TIER 3 ENGINE, GANNON W/ RIPPERS, 4X4, AND SINGLE TILT. UNIT HAS BEEN PROFESSIONALLY MAINTAINED ITS ENTIRE LIFE. READY TO GO TO WORK.

EQUIPMENT SPECIFACATIONS:

Make and model	Case Family III 445T/M3 diesel, Tier III Certified
Gross power	85 hp (63 kW) @ 2200 rpm
Net power	79 hp (59 kW) @ 2200 rpm
Peak torque	276 lb-ft (374 N-m)
Number of cylinders	4
Displacement	274 cu inch (4.5 l)
Aspiration	4-stroke, turbocharged
Transmission type	Standard
Power shuttle standard	4-speed synchromesh with hydraulically actuated clutches and electric F/R shuttle control, clutch disconnect buttons on the transmission shifter and loader control lever
Max travel speed, fwd	25.2 mph (40.5 kph)
No of speeds – fwd	4
No of speeds – rev	4
Service brake type	Individually applied hydraulically actuated maintenance-free self-adjusting inboard mounted wet disc
Service brake location
Service brake actuation	Hydraulic
Front tire size	2WD – 11L x 16.1, 10-ply rating
Rear tire size
System type	Pump
Main pump type	Gear-type, transmission mounted
Lift capacity at full height	6,503 lb (2 956 kg)
Arm breakout force	9,607 lbf (42 734 N)
Max hinge pin height	12.8″ (325 mm)
Max loader bucket heaped capacity	1.03 cu yard (.79 cu mtr)
Min loader bucket width	82″ (2.08 m)
Overall length	16′ 11″ (5.15 m)
Width over tires	81.4″ (2.07 m)
Height to top of cab	107.87″ (2.74 m)
Wheelbase, 4WD	84.5″ (2.15 m)
Turning radius at curb, 4WD brakes applied	23′ 1″ (7.04 m)
Operating weight, 2WD	10,537 lb (4 779 kg)
Fuel tank	31.4 gal (119 l

The post 2012 CASE 570M XT SKIP LOADER-(SOLD) appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

2012 DEERE 210K SKIP LOADER-(SOLD)

admin — Wed, 02 Aug 2017 22:00:18 +0000

2012 DEERE 210K SKIP LOADER FOR SALE

2012 DEERE 210k SKIP LOADER WITH ONLY 1900HRS! THIS UNIT HAS A GP BUCKET, GANNON SCRAPER BOX WITH 3 POINT HITCH AND RIPPERS, 4X4, TIRES ARE NEW. UNIT IS EQUIPPED WITH A TIER 4 INTERIM DEERE ENGINE. READY TO GO TO WORK.

SPECIFACATIONS:

Manufacturer	John Deere
Model	210K Interim Tier 4
DRIVELINE
Engine manufacturer	John Deere
Engine model	PowerTech E 4045HT073
Emission rating	Interim Tier 4
Displacement, ltr (Inches³)	4.5 (276)
Rated speed, rpm	2000
Net output, kW (hp)	66 (88)
Transmission type	Power Shift
Number of speeds – forward	4
Number of speeds – reverse	2
Front axle type	Mechanical FWD
Service type	Wet Multi Disc
Service actuation	Hydraulic w/Power Assist
DIMENSIONS
Overall length, mm (ft/in)	5230 (17 ft 2 in)
Minimum transport height, mm (ft/in)	2540 (8 ft 4 in)
Overall width, mm (ft/in)	2130 (7 ft )
Std shovel width, mm (inches)	2184 (86)
Dump Clearance @ 45 deg, mm (ft/in)	2670 (8 ft 9 in)
Dump Reach, mm (inches)	914 (36)
Bucket Hinge Pin – Max Height, mm (ft/in)	3340 (10 ft 11 in)
Coupler	Standard
CAPACITIES
Fuel tank capacity, ltr (gallons (US))	102.2 (27)
Hydraulic tank capacity, ltr (gallons (US))	37 (9.8)
Shovel cap SAE heaped, m³ (yd³)	0.77 (1)
Alternator capacity, Amp	120
PERFORMANCE
Max. Forward Speed, kph (mph)	31.2 (19.4)
Max. Reverse Speed, kph (mph)	12.9 (8)
Lift Capacity to Full Height, kg (lbs)	2548 (5612)
Oscillation angle, ± °	22
Power Take Off	Optional
PTO rated speed, rpm	540
Breakout force std shovel, kN (lbf)	44.3 (9953)
System voltage, V	12
Pump type	Gear
Pump flow, lt/min (gallons (US) / min)	96 (25.3)
System pressure, bar (PSI)	189.61 (2750)
WEIGHTS
Operating weight, kg (lbs)	4959 (10936)

Specifications are based on published information at the time of publication.Specifications are subject to change without notice.

Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States.In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted.

The post 2012 DEERE 210K SKIP LOADER-(SOLD) appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

2013 DEERE 210K EP SKIP LOADER-(SOLD)

admin — Tue, 01 Aug 2017 20:15:27 +0000

2013 DEERE 210K EP SKIP LOADER

2013 DEERE 210K EP SKIP LOADER WITH 2500HRS. UNIT IS EQUIPPED WITH MP BUCKET, REAR WEIGHTS, DUAL TILT, TIER 4 INTERIM ENGINE, AND 4X4. REAR TIRES ARE NEW FRONTS ARE 75%. JUST SERVICED AND READY TO GO TO WORK.

SPECIFACATIONS:

Manufacturer	John Deere
Model	210K Interim Tier 4
DRIVELINE
Engine manufacturer	John Deere
Engine model	PowerTech E 4045HT073
Emission rating	Interim Tier 4
Displacement, ltr (Inches³)	4.5 (276)
Rated speed, rpm	2000
Net output, kW (hp)	66 (88)
Transmission type	Power Shift
Number of speeds – forward	4
Number of speeds – reverse	2
Front axle type	Mechanical FWD
Service type	Wet Multi Disc
Service actuation	Hydraulic w/Power Assist
DIMENSIONS
Overall length, mm (ft/in)	5230 (17 ft 2 in)
Minimum transport height, mm (ft/in)	2540 (8 ft 4 in)
Overall width, mm (ft/in)	2130 (7 ft )
Std shovel width, mm (inches)	2184 (86)
Dump Clearance @ 45 deg, mm (ft/in)	2670 (8 ft 9 in)
Dump Reach, mm (inches)	914 (36)
Bucket Hinge Pin – Max Height, mm (ft/in)	3340 (10 ft 11 in)
Coupler	Standard
CAPACITIES
Fuel tank capacity, ltr (gallons (US))	102.2 (27)
Hydraulic tank capacity, ltr (gallons (US))	37 (9.8)
Shovel cap SAE heaped, m³ (yd³)	0.77 (1)
Alternator capacity, Amp	120
PERFORMANCE
Max. Forward Speed, kph (mph)	31.2 (19.4)
Max. Reverse Speed, kph (mph)	12.9 (8)
Lift Capacity to Full Height, kg (lbs)	2548 (5612)
Oscillation angle, ± °	22
Power Take Off	Optional
PTO rated speed, rpm	540
Breakout force std shovel, kN (lbf)	44.3 (9953)
System voltage, V	12
Pump type	Gear
Pump flow, lt/min (gallons (US) / min)	96 (25.3)
System pressure, bar (PSI)	189.61 (2750)
WEIGHTS
Operating weight, kg (lbs)	4959 (10936)

Specifications are based on published information at the time of publication.Specifications are subject to change without notice.

Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States.In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted.

The post 2013 DEERE 210K EP SKIP LOADER-(SOLD) appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

2011 DEERE 210LJ SKIP LOADER

Adam Murray — Wed, 12 Apr 2017 18:30:50 +0000

2011 DEERE 210LJ SKIP LOADER- $29,900

2011 DEERE 210LJ SKIP LOADER WITH ONLY 5400HRS! THIS UNIT HAS AN MP BUCKET, GANNON SCRAPER BOX WITH 3 POINT HITCH AND RIPPERS, DUAL TILT, 4X4, AND A TIER 3 DEERE ENGINE. THIS UNIT IS READY TO GO TO WORK. NEW FRONT TIRES WILL BE INSTALLED PRIOR TO SALE. FRESH CONTRACTOR TRADE IN! WILL GO FAST.

SPECIFACATIONS:

Engine 210LJ
Manufacturer and Model. . . . . . . . . . . . . . . . . . . . . . . . . John Deere PowerTechTM E 4045HT turbocharged, standard
Non-Road Emission Standards. . . . . . . . . . . . . . . . . . . . EPA Tier 3/EU Stage IIIA
Displacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 L (276 cu. in.)
Net Peak Power (ISO 9249). . . . . . . . . . . . . . . . . . . . . . . 62.6 kW (84 hp) @ 2,000 rpm
Net Peak Torque (ISO 9249). . . . . . . . . . . . . . . . . . . . . . 367 Nm (270 lb.-ft.) @ 1,300 rpm
Net Torque Rise. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47%
Lubrication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pressure system with spin-on filter and cooler
Air Cleaner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . dual-stage dry type with safety element and evacuator valve
Cooling
Fan Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . suction type
Engine Coolant Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . –37 deg. C (–34 deg. F)
Engine Oil Cooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . oil-to-water
Powertrain
Transmission. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-speed, helical-cut gears, full PowerShiftTM with hydraulic reverser standard; electric clutch cutoff on loader lever
Torque Converter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . single stage, dual phase with 2.63:1 stall ratio; 280 mm (11 in.)
Travel Speeds Forward Reverse
Gear 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6 km/h (3.5 mph) 7.0 km/h (4.3 mph)
Gear 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.2 km/h (6.3 mph) 12.9 km/h (8.0 mph)
Gear 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.9 km/h (13.0 mph) N/A
Gear 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34.9 km/h (21.7 mph) N/A
Axles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . open differential (mechanical-front-wheel drive) front; electrohydraulic locking rear, foot actuated; optional front automatic; traction-control
limited slip
Axle Oscillations, Stop to Stop, Both Axles. . . . . . . . 22 deg.
Axle Ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Static Dynamic Ultimate
Mechanical-Front-Wheel Drive. . . . . . . . . . . . . 12 000 kg (26,455 lb.) 5800 kg (12,787 lb.) 28 200 kg (62,170 lb.)
Rear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 000 kg (28,660 lb.) 7000 kg (15,432 lb.) 30 600 kg (67,461 lb.)
Steering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . hydrostatic power steering and emergency steering (ISO 5010)
Axle, Mechanical-Front-Wheel Drive. . . . . . . . . . . . . With Brakes Without Brakes
Curb-Turning Radius. . . . . . . . . . . . . . . . . . . . . 2.59 m (8 ft. 6 in.) 3.96 m (13 ft. 0 in.)
Bucket Clearance Circle. . . . . . . . . . . . . . . . . . 9.55 m (31 ft. 4 in.) 10.67 m (35 ft. 0 in.)
Steering Wheel Turns, Lock to Lock. . . . . . . . . 2.8
Final Drive, Mechanical Front Wheel. . . . . . . . . . . . . . heavy-duty, outboard planetary final drives distribute shock loads over 3 gears
Brakes (conform to ISO 3450)
Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . power assisted, hydraulic wet disc, mounted inboard, self-adjusting and self-equalizing
Parking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . spring-applied, hydraulically released, wet, multi disc, independent of service brakes with electric switch control; self-engaging with engine shutdown
Hydraulics
Main Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . open-center, single-gear pump, integral priority valve
Rated rpm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,250
Pump Flow
Hitch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 L/m (11.0 gpm)
Loader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 L/m (25.3 gpm)
System Relief Pressure. . . . . . . . . . . . . . . . . . . . . . . . . . 18 961 kPa (2,750 psi)
Hitch Controls
Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-lever, single tilt cylinder
Optional. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-lever dual tilt (includes auxiliary)
Loader Controls
Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . single-lever control with electric clutch cutoff switch
Optional. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . manual auxiliary function
Overall Dimensions
A Ground Clearance, Minimum. . . . . . . . . . . . . . . . . 287 mm (11.3 in.)
B Overall Length, Transport (without box blade). . . . . 5.23 m (17 ft. 2 in.)
C Transport Height
Canopy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.54 m (8 ft. 4 in.)
Cab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.64 m (8 ft. 8 in.)
D Length From Axle To Axle (mechanical-front-
wheel-drive axle). . . . . . . . . . . . . . . . . . . . . . . 2.12 m (6 ft. 11 in.)
E Width Over Tires. . . . . . . . . . . . . . . . . . . . . . . . . . . 2.13 m (7 ft. 0 in.)

The post 2011 DEERE 210LJ SKIP LOADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.