Motor Graders Archives - Pacific Coast Iron - Used Heavy Equipment Dealer https://www.pciequipmentsales.com/product-category/used-heavy-equipment/motor-graders/ Pacific Coast Iron - Used Heavy Equipment Dealer, Used Heavy Equipment for Sale, Heavy Equipment Dealer Thu, 06 Jun 2024 15:16:24 +0000 en hourly 1 https://wordpress.org/?v=6.6.2 https://www.pciequipmentsales.com/wp-content/uploads/2022/03/cropped-Logo_Redesign_V4_Circle_Black_Yellow-32x32.png Motor Graders Archives - Pacific Coast Iron - Used Heavy Equipment Dealer https://www.pciequipmentsales.com/product-category/used-heavy-equipment/motor-graders/ 32 32 2015 DEERE 672GP MOTOR GRADER-SOLD https://www.pciequipmentsales.com/shop/2015-deere-672gp-motor-grader/ Thu, 20 May 2021 01:06:44 +0000 https://www.pciequipmentsales.com/?post_type=product&p=10193 2015 DEERE 672GP MOTOR GRADER FOR SALE

UNIT HAS BEEN PROFESSIONALLY MAINTAINED SINCE NEW AND IS READY TO GO TO WORK.

FEATURES:

  • EROPS HEAT/AC
  • DEERE LINK
  • 14 FT MOLDBOARD
  • MS RIPPER
  • JOYSTICK CONTROLS
  • TIER 4 INTERIM ENGINE

The post 2015 DEERE 672GP MOTOR GRADER-SOLD appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2015 DEERE 672GP MOTOR GRADER

2015 672GP MOTOR GRADER WITH ONLY 2000HRS. UNIT IS EQUIPPED WITH A TIER 4 FINAL ENGINE, MS RIPPER, 14FT MOLDBOARD, DEERE LINK, BLADE FLOAT, REVERSING FAN, TOPCON READY SYSTEM, AND A DEERE POWERTRAIN HYDRAULIC EXTENDED WARRANTY. UNIT HAS BEEN FLEET MAINTAINED SINCE NEW.

Specifications: 
Engine Manufacturer John Deere
Engine Model PowerTech PSS 9.0L
Number Of Cylinders 6
Displacement, ltr (Inches³) 9 (548)
Engine Output – Net, kW (hp) 190 (255)
Peak Engine Torque, Nm (lbf / ft) 1292 (963)
Torque Rise, % 50
Net Power – Gear 1, kW (hp) 149 (200)
Net Power – Gear 2, kW (hp) 157 (210)
Net Power – Gear 3, kW (hp) 168 (225)
Net Power – Gear 4, kW (hp) 172 (230)
Net Power – Gear 5, kW (hp) 179 (240)
Net Power – Gear 6, kW (hp) 187 (250)
Net Power – Gear 7, kW (hp) 190 (255)
Net Power – Gear 8, kW (hp) 190 (255) – No 6WD
Transmission Manufacturer John Deere
Number Of Speeds – Forward 8
Number Of Speeds – Reverse 8
Front Wheel Drive Yes
Axle Oscillation, ± Degrees 32
Front Wheel Lean, ± Degrees 20
Service Brake Type Multiple Wet Discs
Service Brake Actuation Hydraulic
DRIVELINE
Overall Length, mm (ft/in) 8890 (29 ft 2 in)
Height Over ROPS, mm (ft/in) 3180 (10 ft 5 in)
Transport Width, mm (inches) 2490 (98)
Wheelbase, mm (ft/in) 6160 (20 ft 3 in)
Bladebase, mm (ft/in) 2570 (8 ft 5 in)
Moldboard Sideshift – Right, mm (inches) 683 (26.9)
Moldboard Sideshift – Left, mm (inches) 683 (26.9)
Shoulder Reach – Right, mm (ft/in) 2083 (6 ft 10 in)
Shoulder Reach – Left, mm (ft/in) 2083 (6 ft 10 in)
Circle Rotation, Degrees 360
Turning Radius – Minimum, m (ft/in) 7.21 (23 ft 8 in)
Frame Articulation, ± Degrees 22
DIMENSIONS
Operating Weight, kg (lbs) 17140 (37788)
Weight With Push Block & Ripper, kg (lbs) 20000 (44092)
Operating Weight – Maximum, kg (lbs) 24948 (55000)

The post 2015 DEERE 672GP MOTOR GRADER-SOLD appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2016 CAT 120M2 MOTOR GRADER-SOLD https://www.pciequipmentsales.com/shop/2016-cat-120m2-motor-grader/ Thu, 20 May 2021 00:21:18 +0000 https://www.pciequipmentsales.com/?post_type=product&p=10164 2016 CAT 120M2 MOTOR GRADER FOR SALE

UNIT HAS BEEN PROFESSIONALLY MAINTAINED SINCE NEW AND IS READY TO GO TO WORK.

FEATURES:

  • EROPS HEAT/AC
  • PRODUCT LINK
  • 14 FT MOLDBOARD
  • MS RIPPER
  • JOYSTICK CONTROLS
  • TIER 4 FINAL ENGINE

The post 2016 CAT 120M2 MOTOR GRADER-SOLD appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2016 CAT 120M2 MOTOR GRADER 

2016 CAT 120M2 MOTOR GRADER WITH 1800HRS. UNIT HAS BEEN CAT MAINTAINED SINCE NEW. CAT POWERTRAIN HYDRAULIC WARRANTY UNTIL 2025. UNIT IS EQUIPPED WITH A TIER 4 FINAL ENGINE, MS RIPPER SCARAFIER, 12FT MOLDBOARD, PUSH BLOCK, REAR CAMERA, PRODUCT LINK, AND 1400X24 TIRES. UNIT IS EXTREMLY CLEAN AND READY TO GO TO WORK.

Dimensions

A

Overall Length

28.94ft in

B

Width Over Tires

8.24ft in

D

Wheelbase

19.42ft in

E

Rear Ground Clearance

1.15ft in

G

Tandem Axle Wheelbase

4.96ft in

H

Blade Base

8.24ft in

Height To Top Of Isomount Cab

10.86ft in

Specifications

Engine

Torque

692.6lb ft

Number Of Cylinders

6

Engine Model

C7.1 ACERT

Net Power Gear 1-2

145hp

Power Measured @

2100rpm

Displacement

427.8cu in

Bore

4.2in

Stroke

5.4in

Operational

Std Operation Weight – Front Axle

10563lb

Std Operation Weight – Rear Axle

29329lb

Hydraulic System Fluid Capacity

17gal

Std Operation Weight – Total

39892lb

Max Operation Weight – Front Axle

15675lb

Max Operation Weight – Rear Axle

33312lb

Oil System Fluid Capacity

8gal

Max Operation Weight – Total

48987lb

Fuel Capacity

99.9gal

Cooling System Fluid Capacity

13gal

Rear Diff/Final Drive Fluid Capacity

16.6gal

Circle Gearbox Fluid Capacity

1.9gal

Tandem Case Fluid Capacity (Each)

15.6gal

Tire Size

17.5 R25

Steering

Articulation Angle

20degrees

Turning Radius

24.3ft in

Transmission

Transmission Type

Direct Drive, Powershift

Number Of Gears – Forward

8

Number Of Gears – Reverse

6

Max Speed – Forward

28.4mph

Max Speed – Reverse

22.5mph

Front Axle

Wheel Lean

18degrees

Oscillation – Total

32degrees

Ground Clearance

1.9ft in

Moldboard

Moldboard Width

12ft in

Moldboard Height

24in

Moldboard Thickness

0.9in

Max Depth Of Cut

28.4in

Side Shift Left

20.1in

Side Shift Right

26in

Blade Pull At Max Weight

29980.7lb

Blade Down Pressure

27236lb

Hydraulic System

Pump Type

Variable Piston

Pump Flow

55.7gal/min

Relief Valve Pressure

3500psi

Circle

Diameter

60.3in

Rotation

360degrees

Shift Left

25.9in

Shift Right

25.9in

Max Reach Outside Tires – Left

68.6in

Max Reach Outside Tires – Right

75in

Max Lift Above Ground

16.9in

Blade Tip Angle – Front

40degrees

Blade Tip Angle – Rear

5degrees

The post 2016 CAT 120M2 MOTOR GRADER-SOLD appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2015 DEERE 872GP MOTOR GRADER https://www.pciequipmentsales.com/shop/2014-deere-872gp-motor-grader/ Fri, 14 Dec 2018 23:05:10 +0000 https://www.pciequipmentsales.com/?post_type=product&p=7725 2015 DEERE 872GP MOTOR GRADER FOR SALE

UNIT HAS BEEN PROFESSIONALLY MAINTAINED SINCE NEW AND IS READY TO GO TO WORK.

FEATURES:

  • EROPS HEAT/AC
  • DEERE LINK
  • SLOPE ASSIST
  • 16FT MOLDBOARD
  • MS RIPPER
  • ALL WHEEL DRIVE
  • GRADE PRO CONTROLS
  • TIER 4 FINAL ENGINE

The post 2015 DEERE 872GP MOTOR GRADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2015 DEERE 872GP MOTOR GRADER

2015 DEERE 872GP MOTOR GRADER WITH ONLY 2000HRS. UNIT IS EQUIPPED WITH A TIER 4 FINAL ENGINE, 16FT MB, MS RIPPER, EROPS, AWD, GRADE ASSIST, DEERE LINK ULTIMATE, REAR CAMERA, AND A POWERTRAIN HYDRAULIC WARRANTY UNTIL 2023. UNIT IS VERY CLEAN AND READY TO GO TO WORK!

Dimensions

A

Overall Length

29.17ft in

D

Wheelbase

20.21ft in

H

Blade Base

8.31ft in

Height To Top Of Isomount Cab

10.44ft in

Specifications

Engine

Engine Make

2240

Engine Model

PowerTech PSS 9.0L (Tier 4)

Max Power

285hp

Displacement

548cu in

Operational

Std Operation Weight – Front Axle

11230lb

Hydraulic System Fluid Capacity

16gal

Std Operation Weight – Rear Axle

28420lb

Std Operation Weight – Total

39650.2lb

Fuel Capacity

110gal

Moldboard

Moldboard Width

14ft in

Moldboard Height

27.1in

Moldboard Thickness

1in

Hydraulic System

Pump Type

Variable axial piston

Pump Flow

57.5gal/min

Relief Valve Pressure

2750psi

The post 2015 DEERE 872GP MOTOR GRADER appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2008 Deere 872D Motor Grader-(SOLD) https://www.pciequipmentsales.com/shop/2008-deere-872d-motor-grader/ Wed, 27 Jan 2016 00:39:43 +0000 https://www.pciequipmentsales.com/?post_type=product&p=3244 2008 Deere 872D Motor Grader

The post 2008 Deere 872D Motor Grader-(SOLD) appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2008 DEERE 872D MOTOR GRADER WITH ONLY 5000 ORIGINAL HOURS! IT HAS EROPS WITH HEAT/AC, LOW PROFILE CAB, ALL WHEEL DRIVE, 14FT MB, MS RIPPER/SCARIFIER, TIER 3 DEERE ENGINE, BRAND NEW 20X20.5 TIRES, DEERE MAINTAINED ITS ENTIRE LIFE! VERY TIGHT MACHINE.

Hours: 5,000

Location: Placerville, CA 95667

Engine
Make John Deere
Model 6081H
Net Power Gear 1-2 205 hp 153 kw
Net Power Gear 3-4 230 hp 172 kw
Power Measured @ 2000 rpm
Net Power Gear 5-6 245 hp 182.7 kw
Torque Measured @ 1000 rpm
Number of Cylinders 6
Net Power Gears 7-8 235 hp 175.2 kw
Max Power 245 hp 182.7 kw
Net Torque Gears 1-2 793 lb ft 1075 Nm
Net Torque Gears 3-4 835 lb ft 1132 Nm
Net Torque Gears 5-6 872 lb ft 1182 Nm
Net Torque Gears 7-8 942 lb ft 1277 Nm
Displacement 494 cu in 8.1 L
Aspiration Turbocharged with air-to-air after cooler
Operational
Std Operation Weight – Front Axle 10170 lb 4613 kg
Std Operation Weight – Rear Axle 26040 lb 11812 kg
Std Operation Weight – Total 36210 lb 16421 kg
Max Operation Weight – Front Axle 16023.2 lb 7268 kg
Max Operation Weight – Rear Axle 32577.7 lb 14777 kg
Max Operation Weight – Total 48600.9 lb 22045 kg
Fuel Capacity 106 gal 401.2 L
Cooling System Fluid Capacity 13 gal 49.2 L
Hydrauilc System Fluid Capacity 14 gal 53 L
Transmission Fluid Capacity 6 gal 22.7 L
Rear Diff/Final Drive Fluid Capacity 9.5 gal 36 L
Circle Gearbox Fluid Capacity 1.5 gal 5.7 L
Tandem Case Fluid Capacity (each) 20 gal 75.7 L
Tire Size 17.5R25 Radial PR
Operating Voltage 24 V
Alternator Supplied Amperage 100 amps
Transmission
Type Powershift with direct drive
Number of Gears – Forward 8
Number of Gears – Reverse 8
Max Speed – Forward 25.5 mph 41.1 km/h
Max Speed – Reverse 25.5 mph 41.1 km/h
Steering
Articulation L/R 22 degrees
Turning Radius 23.5 ft in 7.2 m
Front Axle
Wheel Lean 20 degrees
Oscillation – Total 32 degrees
Ground Clearance 1.9 ft in 587 mm
Hydraulic System
Pump Type Variable-displacement piston
Pump Flow 54.7 gal/min 207 L/min
Relief Valve Pressure 2750 psi 18960.6 kPa
Moldboard
Moldboard Width 14.1 ft in 4300 mm
Moldboard Height 27 in 686 mm
Moldboard Thickness 0.98 in 25 mm
Side Shift Left 26.8 in 680 mm
Side Shift Right 26.8 in 680 mm
Blade Pull at Max Weight 43760 lb 19849 kg
Circle
Diameter 59.8 in 1520 mm
Rotation 360 degrees
Shift Left 31 in 787 mm
Shift Right 28.5 in 724 mm
Max Reach Outside Tires – Left 91.3 in 2320 mm
Max Reach Outside Tires – Right 90.9 in 2310 mm
Max Lift Above Ground 17.2 in 437 mm
Blade Tip Angle – Front 42 degrees
Blade Tip Angle – Rear 5 degrees
Dimensions
Height to Top of Cab 10.4 ft in 3180 mm
Overall Length 28.9 ft in 8804 mm
Width Over Tires 8.7 ft in 2640 mm
Wheelbase 20.1 ft in 6120 mm
Blade Base 8.3 ft in 2533 mm
Tandem Axle Wheelbase 5.1 ft in 1540 mm
Front Ground Clearance 1.9 ft in 587 mm

The post 2008 Deere 872D Motor Grader-(SOLD) appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2003 CAT 12H Motor Grader-(SOLD) https://www.pciequipmentsales.com/shop/2003-cat-12h-motor-grader/ Tue, 30 Jun 2015 20:49:24 +0000 https://www.pciequipmentsales.com/?post_type=product&p=1420 2003 CAT 12H Motor Grader(sold)

The post 2003 CAT 12H Motor Grader-(SOLD) appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> VERY NICE CAT 12H MOTOR GRADER, 4200HRS, FRONT SCARIFIER, 3 SHANK RIPPER 12FT MOLDBOARD, CAB W/AC/HEAT,SERVICED BY HOLT OF CALIFORNIA ALL RECORDS AND OIL SAMPLES ARE AVAILABLE.

Hours: 4200
Price: $125,000
Location: Sacramento, CA
Selected Dimensions

Dimensions

A. OVERALL LENGTH

28.1 ft in

8571 mm

B. WIDTH OVER TIRES

8 ft in

2440 mm

C. HEIGHT TO TOP OF CAB

10.2 ft in

3107 mm

D. WHEELBASE

20 ft in

6086 mm

E. REAR GROUND CLEARANCE

1.1 ft in

341.5 mm

F. FRONT GROUND CLEARANCE

2 ft in

594 mm

G. TANDEM AXLE WHEELBASE

5 ft in

1523 mm

H. BLADE BASE

8.4 ft in

2575 mm

Specification

Engine

MAKE

Caterpillar

MODEL

C-9 ETA VHP

NET POWER GEAR 1-2

145 hp

108 kw

NET POWER GEAR 3-4

165 hp

123 kw

POWER MEASURED @

2000 rpm

NET POWER GEAR 5-6

165 hp

123 kw

NUMBER OF CYLINDERS

6

NET POWER GEARS 7-8

165 hp

123 kw

MAX POWER

165 hp

123 kw

DISPLACEMENT

537 cu in

8.8 L

Operational

STD OPERATION WEIGHT – FRONT AXLE

8346 lb

3784 kg

STD OPERATION WEIGHT – REAR AXLE

22974 lb

10416 kg

STD OPERATION WEIGHT – TOTAL

31320 lb

14200 kg

MAX OPERATION WEIGHT – FRONT AXLE

13744 lb

6234 kg

MAX OPERATION WEIGHT – REAR AXLE

32074 lb

14549 kg

OIL SYSTEM FLUID CAPACITY

7.1 gal

27 L

MAX OPERATION WEIGHT – TOTAL

45818 lb

20783 kg

FUEL CAPACITY

100 gal

378 L

COOLING SYSTEM FLUID CAPACITY

11.6 gal

44 L

HYDRAUILC SYSTEM FLUID CAPACITY

19.5 gal

74 L

REAR DIFF/FINAL DRIVE FLUID CAPACITY

12.2 gal

47 L

CIRCLE GEARBOX FLUID CAPACITY

1.8 gal

7 L

TANDEM CASE FLUID CAPACITY (EACH)

16.9 gal

64 L

TIRE SIZE

14.00-24 12PR

OPERATING VOLTAGE

24 V

ALTERNATOR SUPPLIED AMPERAGE

75 amps

Transmission

TYPE

direct drive power shift

NUMBER OF GEARS – FORWARD

8

NUMBER OF GEARS – REVERSE

6

MAX SPEED – FORWARD

27.4 mph

44 km/h

MAX SPEED – REVERSE

21.6 mph

34.7 km/h

Steering

ARTICULATION L/R

50 degrees

TURNING RADIUS

24.3 ft in

7.4 m

Front Axle

WHEEL LEAN

18 degrees

OSCILLATION – TOTAL

32 degrees

GROUND CLEARANCE

2 ft in

594 mm

Hydraulic System

PUMP TYPE

variable piston

PUMP FLOW

51.9 gal/min

196 L/min

RELIEF VALVE PRESSURE

3500 psi

24150 kPa

Moldboard

MOLDBOARD WIDTH

12 ft in

3658 mm

MOLDBOARD HEIGHT

24 in

610 mm

MOLDBOARD THICKNESS

0.87 in

22 mm

MAX DEPTH OF CUT

28.9 in

735 mm

SIDE SHIFT LEFT

20.6 in

524 mm

SIDE SHIFT RIGHT

26 in

660 mm

BLADE PULL AT MAX WEIGHT

28867 lb

13094 kg

BLADE DOWN PRESSURE

23807.7 lb

10799 kg

Circle

DIAMETER

60.2 in

1530 mm

ROTATION

360 degrees

SHIFT LEFT

27.4 in

695 mm

SHIFT RIGHT

28.7 in

728 mm

MAX REACH OUTSIDE TIRES – LEFT

73.6 in

1859 mm

MAX REACH OUTSIDE TIRES – RIGHT

71.2 in

1809 mm

MAX LIFT ABOVE GROUND

18.9 in

480 mm

BLADE TIP ANGLE – FRONT

40 degrees

BLADE TIP ANGLE – REAR

5 degrees

Dimensions

HEIGHT TO TOP OF CAB

10.2 ft in

3107 mm

OVERALL LENGTH

28.1 ft in

8571 mm

WIDTH OVER TIRES

8 ft in

2440 mm

WHEELBASE

20 ft in

6086 mm

BLADE BASE

8.4 ft in

2575 mm

TANDEM AXLE WHEELBASE

5 ft in

1523 mm

REAR GROUND CLEARANCE

1.1 ft in

341.5 mm

FRONT GROUND CLEARANCE

2 ft in

594 mm

The post 2003 CAT 12H Motor Grader-(SOLD) appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2007 CAT 143H Motor Grader-(SOLD) https://www.pciequipmentsales.com/shop/2007-caterpillar-143h-motor-grader/ Fri, 19 Jun 2015 00:14:21 +0000 https://www.pciequipmentsales.com/?post_type=product&p=259 2007 CAT 143H Motor Grader(sold)

The post 2007 CAT 143H Motor Grader-(SOLD) appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]> 2007 Cat 143H Motor Grader
EROPS w/ AC 14′ MOBOARD, ALL WHEEL DRIVE, REAR SCARIFIER, TIRES AT 80%, VHP, TRIMBLE SYSTEM AVAILABLE ALSO

Price: $180,000
Location: Sacramento, CA
Dimensions

A. OVERALL LENGTH

28.6 ft in

8713 mm

B. WIDTH OVER TIRES

8.4 ft in

2553 mm

C. HEIGHT TO TOP OF CAB

10.3 ft in

3131 mm

D. WHEELBASE

20.2 ft in

6169 mm

E. REAR GROUND CLEARANCE

1.1 ft in

344 mm

F. FRONT GROUND CLEARANCE

2 ft in

600 mm

G. TANDEM AXLE WHEELBASE

5 ft in

1523 mm

H. BLADE BASE

8.4 ft in

2561 mm

Specification

Engine

MAKE

Caterpillar

MODEL

3176C DITA ATAAC VHP

NET POWER GEAR 1-2

165 hp

123 kw

NET POWER GEAR 3-4

185 hp

138 kw

NET POWER GEAR 5-6

185 hp

138 kw

NET POWER GEARS 7-8

205 hp

152.9 kw

MAX POWER

205 hp

152.9 kw

DISPLACEMENT

629 cu in

10.3 L

Operational

STD OPERATION WEIGHT – FRONT AXLE

9493 lb

4305 kg

STD OPERATION WEIGHT – REAR AXLE

24177 lb

10965 kg

STD OPERATION WEIGHT – TOTAL

33670 lb

15270 kg

MAX OPERATION WEIGHT – FRONT AXLE

17443 lb

7906 kg

MAX OPERATION WEIGHT – REAR AXLE

31420 lb

14240 kg

MAX OPERATION WEIGHT – TOTAL

48863 lb

22146 kg

FUEL CAPACITY

105 gal

397 L

COOLING SYSTEM FLUID CAPACITY

10 gal

38 L

HYDRAUILC SYSTEM FLUID CAPACITY

20.8 gal

80 L

CIRCLE GEARBOX FLUID CAPACITY

1.8 gal

7 L

TANDEM CASE FLUID CAPACITY (EACH)

16.9 gal

64 L

Transmission

TYPE

direct drive, power shift

NUMBER OF GEARS – FORWARD

8

NUMBER OF GEARS – REVERSE

6

MAX SPEED – FORWARD

27.4 mph

44 km/h

MAX SPEED – REVERSE

21.6 mph

34.7 km/h

Steering

ARTICULATION L/R

20 degrees

TURNING RADIUS

24.6 ft in

7.5 m

Front Axle

WHEEL LEAN

18 degrees

OSCILLATION – TOTAL

32 degrees

GROUND CLEARANCE

2 ft in

600 mm

Hydraulic System

PUMP TYPE

axial piston

PUMP FLOW

54.4 gal/min

206 L/min

RELIEF VALVE PRESSURE

3500 psi

24150 kPa

Moldboard

MOLDBOARD WIDTH

12 ft in

3658 mm

MOLDBOARD HEIGHT

24 in

610 mm

MOLDBOARD THICKNESS

0.87 in

22 mm

MAX DEPTH OF CUT

28.1 in

715 mm

SIDE SHIFT LEFT

20.6 in

524 mm

SIDE SHIFT RIGHT

26 in

660 mm

BLADE PULL AT MAX WEIGHT

43977 lb

19931 kg

BLADE DOWN PRESSURE

30126.2 lb

13665 kg

Circle

DIAMETER

60.2 in

1530 mm

SHIFT LEFT

27.4 in

695 mm

SHIFT RIGHT

28.7 in

728 mm

MAX REACH OUTSIDE TIRES – LEFT

74.6 in

1896 mm

MAX REACH OUTSIDE TIRES – RIGHT

77.9 in

1978 mm

MAX LIFT ABOVE GROUND

18.9 in

480 mm

BLADE TIP ANGLE – FRONT

40 degrees

BLADE TIP ANGLE – REAR

5 degrees

Dimensions

HEIGHT TO TOP OF CAB

10.3 ft in

3131 mm

OVERALL LENGTH

28.6 ft in

8713 mm

WIDTH OVER TIRES

8.4 ft in

2553 mm

WHEELBASE

20.2 ft in

6169 mm

BLADE BASE

8.4 ft in

2561 mm

TANDEM AXLE WHEELBASE

5 ft in

1523 mm

REAR GROUND CLEARANCE

1.1 ft in

344 mm

FRONT GROUND CLEARANCE

2 ft in

600 mm

The post 2007 CAT 143H Motor Grader-(SOLD) appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

]]>