LOCATION: FORT HOOD, TX

PRICE: $679,900

SPECS:

LENGTH: 33’10”

WIDTH: 8’4”

HEIGHT: 10’2”

WEIGHT: 61,500

2014 WIRTGEN SP-82 PAVER SPECS

Tank capacities
Fuel tank 120 gal 455 l
Hydraulic oil tank, min. 70 gal 265 l
Water tank 210 gal 800 l
Driving properties
Paving speed 0–19.7 ft/min 0 to 6 m/min
Travel speed 0–65.6 ft/min 0 to 20 m/min

Crawler tracks
Number 2
Type B4: Dimensions (L x W x H) 11’ 1” x 14” x 30” 3,380 x 350 x 765 mm
Height adjustment
Hydraulic 39” 1,000 mm
Mechanical (hole pattern) 19” 470 mm

Miscellaneous
Extremely wear-resistant, two-piece EPS polyurethane track pads
High-pressure water cleaner
3D kit to support external 3D systems
Data interface with data transmission in accordance with WIFMS
Electro-hydraulically retracting protective canopy
Compressed air system
Lighting package with Halogen or Xenon spotlights
Four slab tracers for sensing along a reference surface

Central crown gradient of up to 3 %
Transport dimensions (L x W x H)
Machine set up for max. working width 34’ 5” x 11’ 6” x 10’ 2” 10,500 mm x 3,500 mm x 3,100 mm
Machine weights* 3
Operating weight, CE 42,000 lbs–92,600 lbs 19–42 t

The post 2014 WIRTGEN SP-82 PAVER(sold) appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

2014 Wirtgen TCM 1800 Curing Machine(TEXTURE CURING MACHINE) WITH ONLY 35 HOURS

Self-propelled, track-mounted texture curing machine which follows behind the slipform paver when paving concrete slabs. The unit is equipped with an automatic spraying and brooming system. It is highly suitable in particular for use on ground with low bearing capacity.

LOCATION: FORT HOOD, TX

PRICE: $187,000

S/N:03BA0093

SPECS:

LENGTH: 21’8”

WIDTH: 8’3”

HEIGHT: 8’4”

WEIGHT: 26,800 LBS.

2014 Wirtgen TCM 1800 Curing Machine Specs

Working Width 4.00-18.00 (m)
Working Height 0-500 (mm)
Engine Power 41 (kW)
Operating Weight (1/2 full water/fuel tanks, 75kg driver, and tools) 12,300-13,400 (kg)
Number of Tracks 4
Travel Drive Hydraulic/All-Track

The post 2014 Wirtgen TCM 1800 Curing Machine(sold) appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

• Location: Goffstown, NH
• Hours: 650
• Price: 25,000

MATERIAL CAPACITY

ProTough 400

Maximum Single Load…………………………..3 cubic Yard

Cycle Time, Average…………………………….30 seconds

Shaker Head Decks…………………………………………….2

Screen Area, each, mm (in.) ……….1803 x 2459 (71”x 82”)

Screen Type, Top…………………………..Side Tension

Screen Type, Bottom…………………………….End Tension

WEIGHT

Gross, kg. (lbs.)……………………..5870 (12,940)

Tongue, kg. (lbs.)…………………………1497 (3,300)

TOWING

Hitch Type……….Pintle, Height Adjustable

Axle Type …………Single Axle, Dual Wheel

Axle Rating, kg. (lbs.) ……………………..4545 (10,000)

Tire Pressure, kPa (psi)………………………………..551 (80)

Suspension……………………………………….None

Brake System……………………………………Electric

HYDRAULICS

Pump Type / Brand………………..Gear / Sundstrand

Shaker Motor Type / Brand………………Piston / Sundstrand

Control Valve(s) 2 per machine………………………1 Double Spool 1 Single Spool

Cylinders…………………………………………….2

Oil Cooler, kJ / m (Btu / m) ……………………………..448 (425)

ENGINE

Make / Model………………..Kubota / V1305-B

Type…………..Vertical, Water Cooled 4 Cycle Diesel

Displacement, cc (cu. in.) …………………………….1335 (81.5)

ISO Net Horsepower @ 3000 rpm, kW (hp) ………………………………..22.5 (30)

Torque @ 2000 rpm, Nm (lbs./ft) …………………………..60 (43.4)

ELECTRICAL

Battery Type, (BCI Group)……………………………………12 Volt

Battery Capacity …………………………………………730 C.C.A.

Alternator………………………………….30 Amp

DIMENSIONAL SPECIFICATIONS

ProTough 400

A. Overall Length, mm (in.)……………….6261 (246) 20’-07”

B. Transport Height (overall), mm (in.)………………3251 (128) 10’-08”

C. Overall Width, mm (in.) …………………………2311 (91) 7’-07”

D. Hopper Length, mm (in.)…………………………3099 (122) 10’-02”

E. Loading Height, mm (in.)………………3099 (122) 10’-02”

F. Operating Height, mm (in.) ……………………….2946.4 (116) 9’-08”

G. Shaker Head Width, mm (in)………………….1829 (72) 6’-00”

H. Finish Capacity, Bucket Width, mm (in.) ……………2896 (114) 9’-06”

J. Finish Capacity, Bucket Height, mm (in.)………………..1422 (56) 4’-08”

The post 2005 Thomas Protough 400 (SOLD) appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

• Price: 12,500
• Hours: 2000
• Location: Meridian, ID

1985 Etnyre R-504 Specs

RUNS GREAT AND READY TO WORK. HAS A 200 HP DETROIT DIESEL MOTOR WITH APPROX. 2000 HRS, DUAL CONVEYORS, TIRES IN GOOD SHAPE, ALL HYDRAULICS ARE IN GOOD SHAPE WITH NO LEAKS, RUNS GREAT AND READY TO WORK. HAS A 200 HP DETROIT DIESEL MOTOR WITH APPROX. 2000 HRS, DUAL CONVEYORS, TIRES IN GOOD SHAPE, ALL HYDRAULICS ARE IN GOOD SHAPE WITH NO LEAKS.

The post 1985 Etnyre R-504 (Sold) appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

• Price: $18,000
• Location: Placerville, CA
• Hours: 2300

1998 Ingersoll Rand 780T Specs

SCREED 8-14′ REAR EXTENSIONS, POLY TRACKS 73 X 12, DIESEL PERKINS 120HP, DIMENSIONS: OVERALL LENGTH 192, OVERALL HEIGHT 101, WIDTH HOPPER UP 104 WIDTH HOPPER DOWN 130, WEIGHT 23,900, Operating Weight 19,000 – 24,999 lbs,

The post 1998 Ingersoll Rand 780T (SOLD) appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.